Front and Rear Panel View
R&S
®
FSVA/FSV
21
Quick Start Guide 1321.3066.02 ─ 06
8 = Error message, if available
9 = Device status
10 = Progress bar for measurement
11 = Date and time display
12 = Softkeys for menu access
3.1.3
Connectors on the Front Panel
This section describes the front connectors and interfaces of the R&S
FSVA/FSV.
Optional connectors and interfaces are indicated by the option name in brackets.
Most connectors on the front panel (except for USB) are located at the bottom
right-hand side.
3.1.3.1
USB
The front panel provides two female USB connectors to connect devices like a
keyboard or mouse. Also a memory stick can be connected to store and reload
instrument settings and measurement data.
3.1.3.2
NOISE SOURCE CONTROL
The noise source control female connector is used to provide the supply voltage
for an external noise source, e.g., to measure the noise figure and gain of amplifi-
ers and frequency converting DUTs.
Conventional noise sources require a voltage of +28 V in order to be switched on
and 0 V to be switched off. The output supports a maximum load of 100 mA.
3.1.3.3
RF INPUT 50
Ω
The RF input is to be connected to the DUT via a cable equipped with an appro-
priate connector.
Front Panel View
