Preparing for Use
R&S
®
FSVA/FSV
44
Quick Start Guide 1321.3066.02 ─ 06
4.1.10 Checking the Supplied Options
The instrument may be equipped with both hardware and firmware options. In
order to check whether the installed options correspond to the options indicated
on the delivery note, proceed as follows.
1. Press the SETUP key.
2. Press the "System Info" softkey.
3. Press the "Ve Options" softkey.
A list with hardware and firmware information is displayed.
4. Check the availability of the hardware options as indicated in the delivery
note.
For an overview of the available options, refer to the datasheet.
4.2
Connecting USB Devices
The USB interfaces of the R&S
FSVA/FSV allow you to connect USB devices
directly to the instrument. Increase the number of possible connections using
USB hubs. Due to the large number of available USB devices, there is almost no
limit to the expansions that are possible with the R&S
FSVA/FSV.
The following list shows various USB devices that can be useful:
●
Memory stick for easy transfer of data to/from a computer (e.g. firmware
updates)
●
CD-ROM drives for easy installation of firmware applications
●
Keyboard or mouse to simplify the entry of data, comments, filenames, etc.
●
Printer for printing measurement results
●
Power sensors, e.g. of the NRP Zxy family
Installing USB devices is easy under Windows, because all USB devices are
plug&play. After a device is connected to the USB interface, the operating system
automatically searches for a suitable device driver.
If Windows does not find a suitable driver, it prompts you to specify a directory
that contains the driver software. If the driver software is on a CD, connect a USB
CD-ROM drive to the instrument before proceeding.
Connecting USB Devices
