MobiLink IP
CALL CONTROL
MobilinkIP_Usermanual-sw1.2.21_revGen.doc
Page 132 of 188
CBK – Call Back
The call-back feature (CBK) means that when a number form the list calls in, MobiLink-IP hangs up,
then initiates a call to the respective number, placing him in connection with the intended target. This
way, the clients in the fields will no longer be charged for the calls, the billing will be for the SIM cards
used in MobiLink IP!
With call-back, there are also available three modes of treating the incoming calls, as target (
CBK-
target
), as DISA (
CBK-DISA
) or using Dynamic routing of calls (CBK-DCR)
Note:
In “CALL CONTROL>Incoming Calls” there is no CBK option. Only the mobile numbers listed in the
above table can benefit of the callback feature, to prevent abuse!
Target
– when you select the mode Target, you must also
complete the field Target, enter the number of the destination for
the incoming call.
Here, target has been set to extension number “283”
Action
– from the last column, select the action to be
performed. When you are editing one of the “Local user
Mobiles” rows, the last field, Action, provides you with the
options
Edit
, to make changes, respectively
Exit
, to get out, or
More
, to access further parameters.
Click the link “More” to go to the next window for localuser Mobile settings, as shown below:
Select Enable to activate the feature, enter the remote mobile phone number that you want to register
as PBX extension, then choose one of the two mobile interfaces to assign it.
You can leave it to the default “any”, or lock it to one of the GSM modules, “mobile 1” or “mobile 2” .
