MobiLink IP
CALL CONTROL
MobilinkIP_Usermanual-sw1.2.21_revGen.doc
Page 163 of 188
Immediately after pressing the Set button, the MobiLink IP equipment is already operating with the
new time/date, there is no need to use
Commit
.
In fact, when you set manually the time and date and then perform other changes of other parameters
for the MobiLink IP device, you must use Commit to save the modifications, the new time / date will be
lost upon restarting of the equipment!
6.10.10 Cron
Allows you to set up entries in the
CronTab
table.
“Cron” is an Unix utility (Unix daemon) that executes at a specified time and date commands from a
crontab file.
Cron is used to schedule some functions to be performed periodically, in this case to Clean Out the
temporary files , clean the text messages or to reset one or both Mobile modules.
At first, all rows of the CronTab table are empty, you must use
New
and
Save
to create a new entry:
