MobiLink IP
Status indicators
MobilinkIP_Usermanual-sw1.2.21_revGen.doc
Page 75 of 188
Action
The button to the end of each row shows either
Edit
, to edit it, or two options,
Exit
to quit editing the respective line of settings, and
More
to go to the following
page for configuring the parameters of the mobile interface.
Press More to continue:
The window which shows up includes all
the settings, for the respective module
(mobile2 in this example).
There was no room to display all the
settings in the previous table, which
included all two or four modules, so if
you need to edit all l the settings, you
must use this kind of vertical window, for
each module.
The fields Status, Volume for Rx and TX,
CLIP and CLIR have been explained
previously,
here
are
also
other
parameters: progress tone, PIN, etc.
All these additional settings are explained below:
