MobiLink IP
CALL CONTROL
MobilinkIP_Usermanual-sw1.2.21_revGen.doc
Page 157 of 188
Note
:
It is highly recommended to backup the configuration from time to time. This way the user can
always load the saved configuration, if there is need.
For instance, when performing a “Restore to factory defaults”, all previous settings are lost. If the
configuration was previously saved, it can be loaded back to perform changes.
Also, one should perform a “Save” before using “Update” to load a new software image, since the new
firmware could erase some of the settings.
Such precautions are especially useful when you have configured many particular settings, for
example related to routing rules, registration of mobile and SIP users or routing of incoming and
outgoing calls – it will take a long time to add and edit all these specific settings by hand.
6.10.8 Load
It loads a configuration file that has been saved previously or restores a backup.
This is the operation complimentary to “Save”:
