MobiLink IP
Status indicators
MobilinkIP_Usermanual-sw1.2.21_revGen.doc
Page 32 of 188
6.2.3
Log-in
Now the user will be asked to enter a user name and a password to access the configuration page of
the device MobiLink from Rohde & Schwarz Topex S.A. .
For the SMS pages, you should type
the name
“user”
and associated
default password
“99user11”,
to
enter the SMS send / receive pages:
For the Administration pages, you
must type the user name “admin”
and associated default password
“99admin11”, to be able to manage
the equipment:
Correspondingly, after successful log-in you may change the password for each of the users (you
should do this, to prevent unauthorized access!).
Persistence of authentication
Normally, if you have logged-in as User, then you wand to enter as Administrator, or vice-versa, you
should close down the browser, then open it again and type the address of the MobiLink IP
configuration page: https://192.168.173.1 in order to log-in with the user name that you want. But if
you have entered once in the web interface the passwords both for User and respectively Admin, then
when you want to log-in a second time either as User or Admin, it won’t request a password from you
anymore!
Now when you type again the address https://192.168.173.1 into the web browser and perform click
either over SMS Pages or Administration Pages (from the same computer!), it won’t ask you anymore
for name and password … once authentication is done form a certain computer, you don’t need to do
it again, unless you restart the computer!
For the administrator of the system
network, the default user name is
admin
and the password is
99admin11
.
Later, this password may be changed using
the web configuration page, as described in
the paragraph about Password.
For security reasons, it is strongly
recommended to change the default
password with one of own choice as
soon as possible Also, do NOT mark
the
checkbox
“Remember
my
password” in the browser
