MobiLink IP
CALL CONTROL
MobilinkIP_Usermanual-sw1.2.21_revGen.doc
Page 171 of 188
First of all, enable or disable the
Capture
feature.
By default, it is Disabled.
Set it to Enable if you need to perform
capture!
When you Disable the Capture feature, all subsequent fields will be disabled!
If you enable “
Start at reboot
”, the capture
will begin immediately as MobiLink IP starts
operating, and will continue for the duration
established in the field “Capture Timeout”.
MobiLink IP will run the Capture utility
immediately as it starts operation, before
other programs, such as the principal
application, the call control function.
Capture Timeout
– here you can select from the drop list the
duration of the capture performed upon MobiLink IP start-up.
Available time intervals are 15, 30, 45 , 60, 120, 280 and
respectively 480 seconds (up to eight minutes).
