Rodgers W-5000, User Manual

Page: 18 / 165

Chapter 1
18
INSTALLING THE PEDALBOARD
(W-5000 Version "A" Only)
Once the instrument is secured to the stand, it will be necessary to install the Pedalboard.
The Pedalboard unit contains two metal hooks which simply hook over top of the short metal bars on the
bottom of the stand. (It's very important to make sure the Pedalboard is straight while you firmly push it into
its latched position):
If you like, you can also adjust the height of the Pedalboard.
Note: If you are installing the unit on thick carpet, raise the console by rotating its adjustable feet so the
Pedalboard is relatively parallel to the floor:
¶ Place the Pedalboard
against the metal hanger
pins on the bottom of the
stand.
· Push the Pedalboard
from the center of the
heelboard.