Rodgers W-5000, User Manual

Page: 16 / 165

Chapter 1
16
SETUP AND INSTALLATION
Because of the W-5000's size and weight, setup and installation are somewhat more involved than with a
smaller instrument. Your Rodgers dealer will very likely assist with the delivery and initial setup of your
new instrument, and this provides a good opportunity to gain first-hand experience with the process.
BASIC ASSEMBLY
Your Rodgers dealer may deliver your W-5000 in one piece, or it may be necessary to assemble the two
main sections; the keyboard itself and the stand. The information provided here will also be useful should
you need to disassemble the instrument for future transport.
SPKR
LINE
- +
- +
UPPER
USER
LOWER
BASS
PERC
UPPER
EFFECTS
BASS
3
4
5
6
7
8
9
LOWER
NEXT
+ +
+
VOICING
CONTROLS
MIDI
PREVIOUS
STOP
REC
PLAY
- -
-
SMF
SMF
FUNCTIONS
Ë Insert and
tighten the screws
provided
(three per side).
To disassemble
the unit, remove
these screws first.
Ê Slide the locking grooves of
the brackets until they sit tightly
against the pins on the stand. To
disassemble, slightly raise the
front of the keyboard to clear the
alignment pins and then slide the
keyboard forward to disengage
the groves from the rear pins. Be
sure to disconnect the
speaker/Expression
pedal/Pedalboard cable first!
Alignment pin
(both sides)