Rodgers W-5000, User Manual

Page: 110 / 165

Chapter 10
110
PARAMETER LISTS
The following section contains a list of all the W-5000's parameters. These parameters allow you to
configure your instrument in precisely the manner you wish, as they cover everything from chorus and
reverb settings, to MIDI settings, to panel light adjustments.
Each sub-section contains the parameters found under the corresponding panel button. Buttons are grouped
as they appear on the panel. So, for example, all the parameters related to reverb are listed under
'[GENERAL REVERB] Parameters' in the EFFECTS section. Each parameter is presented as it appears in
the LCD and the available setting range or options are listed immediately afterward. A brief explanation of
the parameter's function follows.
As mentioned at the beginning of this manual, the buttons in the EDIT section are used to select the various
parameters and then navigate through the setting range or available options for that parameter. Generally,
whenever a panel button is pressed, the LCD instantly displays information in regard to the selected item.
Use the [NEXT] and [PREVIOUS] buttons to select the different parameters available for that selected item
(or move the underline cursor from field to field). Then use the [+] and [-] buttons to increase or decrease the
value by one (or select the next option), or the [++] and [--] buttons to increase or decrease the value in large
jumps. In situations where you are to carry out (execute) a command (to format a floppy disk, for example),
you'll normally press the [+] button.
As always, the best way to really appreciate what these parameters do is to try them out! (Setting a parameter
to its extreme values can really make clear the effect it has.)