Rodgers W-5000, User Manual

Page: 155 / 165

Appendix
155
Other Continuous Controllers:
Name NRPN (Hex)
DB16 NRPN 02:10 on upr/lwr/ped mst chn
DB513 NRPN 02:11 on upr/lwr/ped mst chn
DB8 NRPN 02:12 on upr/lwr/ped mst chn
DB4 NRPN 02:13 on upr/lwr/ped mst chn
DB223 NRPN 02:14 on upr/lwr/ped mst chn
DB2 NRPN 02:15 on upr/lwr/ped mst chn
DB135 NRPN 02:16 on upr/lwr/ped mst chn
DB113 NRPN 02:17 on upr/lwr/ped mst chn
DB1 NRPN 02:18 on upr/lwr/ped mst chn
DBPerc4 NRPN 02:19 on upr mst chn
DBPerc223 NRPN 02:1A on upr mst chn
VolUprT1 NRPN 02:20 on upr mst chn
VolUprT2 NRPN 02:21 on upr mst chn
VolUprSolo NRPN 02:22 on upr mst chn
VolLwrT1 NRPN 02:20 on lwr mst chn
VolLwrT2 NRPN 02:21 on lwr mst chn
VolLwrSolo NRPN 02:22 on lwr mst chn
VolBassT1 NRPN 02:20 on ped mst chn
VolBassT2 NRPN 02:21 on ped mst chn
Switched Assignable Controllers:
Name CC (Hex) NRPN (Hex)
IntFS1 CC 40 on any mst chn
IntFS2 CC 43 on any mst chn
ExtFS CC 42 on any mst chn
Rotary S/F NRPN 02:50 on any
mst chn
Pedal
Notes NRPN 02:60 on any
mst chn
Other Switched Controllers:
Name CC (Hex) CC Description
Bank MSB CC 00 on any mst chn if GS piston
memory mode
Bank LSB CC 20 on any mst chn if GS piston
memory mode
Prg#s Transmitted:
Only received on any Master Channel if that Master Chn Input
Filter is not:
PC= Filter Program Changes (incl. CC 0/CC 32)
PC+CC= Filter Program C Control Changes
NOTE+PC= Filter Notes + Program Changes (incl. CC 0/CC
32)
PC 1-8 Selects General Preset
PC 20 Selects General Cancel
PC 31 Selects Memory 1 (if GS piston memory mode)
PC 32 Selects Memory 2 (if GS piston memory mode)
MIDI Commands (Other Than Notes) That
Appear In Native Sequences:
Standard MIDI Controls:
Name CC (Hex) Parameters
Program Bank CC 00 0..127
Glide Time CC 05 0..127, as defined by GS
module
Volume CC 07 0..127 squared
Pan CC 0A 0..127 is full left to full
right
Expression CC 0B 0..127 squared
Program Map CC 20 0..127
Sustain Switch CC 40 0 is off, 127 is on
Glide Switch CC 41 0 is off, 127 is on
Sostenuto
Switch CC 42 0 is off, 127 is on
Soft Switch CC 43 0 is off, 127 is on
Reverb Level CC 5B 0..127 squared
Chorus Level CC 5D 0..127 squared
Pitch PB 0..0x3FFF is -
12 12 semitone range
Program
Number PC 0..127
All Sounds Off CC 78 0..127
(NOTE: PB is used both for VOICING detune and for
bender)
Standard Registered Parameters (both bytes
used):
Pitch Bend Range NRPN 00:00 value is always 0x0C00
GS Non-Registered Parameters / Control
Changes (only MSB used):
Name CC
(Hex)
NRPN
(Hex) Parameters
Vibrato
Rate NRPN 01:08 14..114 is bipolar
adjustment
Vibrato
Depth NRPN 01:09 14..114 is bipolar
adjustment
Vibrato
Delay NRPN 01:0A 14..114 is bipolar
adjustment
Cutoff NRPN 01:20 14..114 is bipolar
adjustment
Resonanc
e NRPN 01:21 14..114 is bipolar
adjustment
Attack NRPN 01:63 14..114 is bipolar
adjustment
Decay CC 46 NRPN 01:64 14..114 is bipolar
adjustment
Release CC 48 NRPN 01:66 14..114 is bipolar
adjustment
Rodgers Non-Registered Parameters / Control
Changes: