Rodgers W-5000, User Manual

Page: 107 / 165

Using MIDI
107
aware, however, that Start and Continue messages are treated in the same way, and that a Stop message
activates the pause function. Two Stop messages in a row, however, reset the sequence to the beginning.
MIDI Sync Out
Port: Off, 1, 2, Both
This parameter tells the W-5000 from which port (or ports) to transmit MIDI Clock, Start, Continue and Stop
messages. Clock messages are transmitted even while the internal sequence isn't playing so that an external
sequencer can monitor the tempo. Start messages are transmitted at the beginning of a sequence, or whenever
playback is paused and a Continue message is then transmitted.
CONTROLLING ANOTHER
RODGERS ORGAN
The W-5000 (from either of its MIDI OUT ports) can control another Rodgers organ. However, it cannot
select individual Tones; it can only select General Presets on the other instrument.
For this example, connect the MIDI IN of the other Rodgers organ to the MIDI OUT 1 port of the W-5000:
Be sure the following parameters are set in your W-5000 (access them by pressing the [MIDI] button in the
FUNCTIONS section). Refer to the previous sections for a brief description of these parameters:
MIDI Mst Out Port 1
MIDI Mst Out Chn U:13 L:12 P:14
MIDI Mst Out Filt U: NONE
MIDI Mst Out Filt L: NONE
MIDI Mst Out Filt P: NONE
MIDI Mst Out Exp CC#: 7
Your W-5000
The ‘Other’ Rodgers
Organ