Rodgers W-5000, User Manual

Page: 116 / 165

Chapter 10
116
[KEYBD BASS] Parameter
This parameter affects the Keybass section (when it is active). Press the [KEYBD BASS] button in the
BASS section to access this parameter:
Keyboard Bass
Split: E2-G8
This parameter allows you to set the split point for the Keybass section. Press the [+] and [-] (or [++]/[--])
buttons to set the split point.
Bass [SUSTAIN] Parameters
These parameters allow you to affect Bass sustain and other Bass functions. Press the [SUSTAIN] button in
the BASS section to access these parameters:
Bass Synth
Sustain Time: 0-10
This parameter allows you to set the level of sustain (release time) for Synth Bass notes; it affect both the
Keybass and the Pedalboard. Set the level with the [+]/[-] buttons.
Solo Mode: Poly, First, Last, Low, High
This parameter allows you to set the Solo mode for the Bass section(s). The Bass Solo function operates in
the same way as the Solo function for the Upper and Lower manuals. Press the [NEXT] button to select this
parameter. Use the [+] and [-] buttons to select the Solo mode. (If set to an option other than 'Poly', new
notes played will 'clip' (cut off) previous notes.)
Roll Time: 0-127
This parameter allows you to set the delay time (in milliseconds) the unit waits before playing the sound
when you play a note in the opposite direction from the Solo mode type. (For example, when playing down
the keyboard when the 'High' mode is selected.) Press the [NEXT] button to select this parameter. Use the
[+] and [-] (or [++]/[--]) buttons to make the Roll setting.