Rodgers W-5000, User Manual

Page: 101 / 165

Using MIDI
101
First, however, quickly review the parameters described in 'Using The W-5000 As A Sound Module' (page
94). Some of those same parameters will be useful to you. To get you started, here a few parameters you'll
need to set:
MIDI Mst Out
Port: 1, 2
This parameter determines which port (1 or 2) is used as the Master MIDI Output. Data played on the
instrument is sent from the selected port. Press [NEXT] to select this parameter. Use the [+]/[-] buttons to
choose port '1'.
MIDI Mst Out Chn
U: 1-16 L:1-16 P: 1-16
These three parameters determine which MIDI channel (1-16) will be used for the Master MIDI Output.
Data played on the instrument is transmitted on the selected channel. Press [NEXT] to select this parameter
(and to move from field to field) . Use the [+]/[-] buttons to set the channels.
MIDI Mst Out Flt
U: None, PC, CC, CC+PC, Note, PC+Note, CC+Note, All
This parameter determines what type of data is filtered out of the data sent to the Master MIDI Output from
the Upper keyboard. The following options are available:
•
NONE : No filtering is done
•
PC : Program Changes (preset selections) are filtered
•
CC : Control Changes (such as UPPER Drawbars and UPPER BALANCE sliders) are filtered
•
CC+PC : Control Changes and Program Changes are filtered
•
NOTE : Note data is filtered
•
PC+Note : Program Changes and Note data are filtered
•
CC+Note : Control Changes and Note data are filtered
•
All : All data is filtered
Press [NEXT] to select this parameter. Use the [+]/[-] buttons to select 'CC+PC'.
MIDI Mst Out Flt
L: None, PC, CC, CC+PC, Note, PC+Note, CC+Note, All
This parameter determines what type of data is filtered out of the data sent to the Master MIDI Output from
the Lower keyboard. The available options are the same as those listed above. Press [NEXT] to select this
parameter. Use the [+]/[-] buttons to select 'CC+PC'. (Preset selections and generally assignable controllers
are transmitted on the Lower MIDI Master Channel. Therefore, it is this filter that you will most likely
change, even if you are not playing on the Lower manual.)
MIDI Mst Out Flt
P: None, PC, CC, CC+PC, Note, PC+Note, CC+Note, All
This parameter determines what type of data is filtered out of the data sent to the Master MIDI Output from
the Pedalboard or keybass. The available options are the same as those listed above. Press [NEXT] to select
this parameter. Use the [+]/[-] buttons to select 'CC+PC'.
MIDI Mst Out
Exp CC#: 7, 11
This parameter determines which Control Change command is sent when the Expression pedal is moved: 7
or 11. Press [NEXT] to select this parameter. Use the [+]/[-] buttons to select '7'.
MIDI Start
Stat Send: Both, CC, PC, None
This parameter determines what type of information is sent when the W-5000 receives a MIDI Song Start or
Song Continue message: Both, CC, PC, None. If set to 'None', nothing is sent when these MIDI timing