User Manual – EC II GSM SE
23
Note that at every start-up the EC II GSM SE tries to unlock the SIM card. If an incorrect PIN
code is programmed the SIM card will be locked after 3 start up attempts. Then the PUK code
is needed to unlock the SIM card, see more under section 8.4.9 below.
8.3.2 Reset to factory setting
If the EC II GSM SE is moved to another building or if the alarm numbers are changed or if
the unit has been incorrectly programmed; the best thing might be to simply delete all old set-
tings. The PIN code is not deleted. Reset all setting in EC II GSM SE with:
8.3.3 Closing or breaking alarm button
Breaking function (NC) is pre-programmed for the alarm button input in the central unit as well
as in the speech unit. If an alarm button of closing type (NO) is connected FältCom GSM SE
must be programmed for this.
Program the following when an alarm button of closing type (NO) is connected to the
central
unit
alarm button input:
Reset the alarm button in the
central unit
to breaking function (NC) with:
Program the following when an alarm button of closing type (NO) is connected to the
speech
unit
alarm button input:
Reset the alarm button in the
speech unit
to breaking function (NC) with:
8.3.4 Alarm telephone number and alarm code
For speech connection with an alarm centre, the phone numbers and alarm code specified by
that alarm centre must be used. The alarm code inform the alarm centre which lift and which
building the alarm comes from.
Note that it is important that several numbers are programmed if it is not an
alarm centre with constant manning!
The EC II GSM SE is always programmed in the same way, independent if it will call an alarm
central or a telephone/mobile.
An alarm code must always be programmed
independent if
the EC II GSM SE should call an alarm central or a telephone.
The EC II
GSM SE will be locked for about 10 seconds before the programming
can continue which is indicated by sound signals. A 4-tone is heard from the
loudspeaker when the programming can continue
Summary of Contents for EC II GSM SE
Page 1: ...EC II GSM SE User Manual...
