User Manual – EC II GSM SE
24
Enter phone number for alarm receiver 1:
<Phone number, max 20 digits>
Enter alarm code for alarm receiver 1:
<Alarm code, max 10 digits>
Enter phone number for alarm receiver 2:
<Phone number, max 20 digits>
Enter alarm code for alarm receiver 2:
<Alarm code, max 10 digits>
For alarm receivers 3–6 use the keys:
,
,
and
instead of
under item 4. These num-
bers automatically have the same alarm code as alarm receiver 1.
Note! Do not forget to test the function by making a test alarm!
8.3.5 Test alarm to test the installation
After completed the installation, the EC II GSM SE must be tested with a test alarm. Press the
alarm button in the lift car and check that the alarm reaches alarm receiver 1.
To test that the alarm also reaches secondary receivers use the keypad on the back of the
speech unit. Check that the alarm reaches alarm receiver 2 by pressing programming mode:
EC II GSM SE immediately leaves the programming mode and calls alarm receiver 2.
If there are more alarm receivers, test them by substituting
in the sequence above by
,
,
and
.
8.4 Optional functions that may be programmed
Below follows a description of all optional programming sequences, which can be used with
EC II GSM SE.
8.4.1 Automatic test alarm
By activating the function automatic test alarm EC II GSM SE will call an alarm receiver with
certain interval to check the connection. Note the function automatic test alarm may only be
programmed if the function is ordered by the alarm receiver.
Select the required test interval between 1 to 9 days:
<1–9>
Enter telephone number for the test alarm receiver with:
<Phone number, max 20 digits>
Enter alarm code for the test alarm:
<Alarm code, max 10 digits>
Summary of Contents for EC II GSM SE
Page 1: ...EC II GSM SE User Manual...
