Rockwell Automation Allen-Bradley MobileView 2711T-VMBRACKET, User Manual

Page: 88 / 104

88 Rockwell Automation Publication 2711T-UM001E-EN-P - March 2019
Chapter 6 Maintain and Troubleshoot the MobileView Terminal and IP65 Junction Box
Handle and Care for the
MobileView 2711T Terminal
and IP65 Junction Box The MobileView™ 2711T terminal and IP65 junction box are high-quality
devices that are equipped with state-of-the-art electronics.
To avoid malfunctions or damage through improper handling, follow these
instructions during operation.
Chemical Resistance MobileView 2711T terminals and IP65 junction boxes resist the following
chemicals:
• Isopropanol
• Glass cleaner
• Multi-purpose grease
• General-purpose lubricants
ATTENTION: Do not operate a terminal or any junction box if the cable is
damaged or pinched. To avoid damage to the cable, do not place the cable
over or around sharp objects.
• When the terminal is not in use, hang the terminal in the mounting
bracket or place inside a cabinet or enclosure.
• To avoid dropping the terminal, do not set the terminal on unstable
surfaces and keep the cable clear of high traffic areas.
• To avoid damage to the operating elements, do not set the terminal on its
operating side.
• If the terminal falls to the ground, test the E-stop switch and enabling
switch before operating the machine/plant.
• Do not set the terminal near heat sources and avoid direct sunlight.
• Do not expose the terminal or IP65 junction boxes to excessive mechanical
vibrations, excessive dust, humidity, or strong magnetic fields.
• Help prevent foreign objects or liquids from getting into the terminal or
IP65 junction box. Check the protective covers of the device regularly.
Make sure that all screws are firmly tightened, and that the housing and
cable entrance is not damaged.
• Turn off the power supply before you remove the back cover of the
MobileView 2711T terminal or you remove an IP65 junction box from its
back plate. When the back cover or back plate are removed, the terminal or
IP65 junction box are sensitive to ESD.
• If a terminal or junction box exhibit any anomaly, have the unit thoroughly
and fully tested by the manufacturer or authorized repair dealer before
you operate the terminal again.