Rockwell Automation Allen-Bradley MobileView 2711T-VMBRACKET, User Manual

Page: 55 / 104

Rockwell Automation Publication 2711T-UM001E-EN-P - March 2019 55
Chapter
5
Set Up the BIOS Settings and Desktop Icons
End User Setup Procedure When a MobileView™ 2711T terminal is powered up for the first time, there are
several set-up messages that appear as part of the Microsoft® Windows® End User
Setup procedure.
If your MobileView 2711T terminal must be reformatted, then see ‘Initial
Configuration of the Windows Operating System’ in publication
2711T-QS001 , MobileView Tethered Operator Terminal Quick Start (for first
generation MobileView terminals) or 2711T-QS002 , Second Generation
MobileView Terminal Quick Start, for this set-up procedure.
Topic Page
End User Setup Procedure 55
Desktop Overview 56
Enhanced Write Filter (EWF) 57
FTView ME Station 58
KEPServer Enterprise 67
VNC Server 67
System Config 69
Network Settings 72
Remote Desktop 73
Touch Calibration 74
Rescue 75
Restore the Default BIOS 75
Change the BIOS Password 77
Back Up the Operating System Image 80
Restore the Operating System Image 83
IMPORTANT Do not disconnect power from a MobileView 2711T terminal until after the
Windows End User Setup procedure is completed.
If power is disconnected during this procedure, it can result in a corrupted
system image.