Rockwell Automation Allen-Bradley MobileView 2711T-VMBRACKET User Manual Download Page 81

Page: 81 / 104

Rockwell Automation Publication 2711T-UM001E-EN-P - March 2019

Set Up the BIOS Settings and Desktop Icons

Chapter 5

The Bootable Service System (BSS) screen appears.

From the BSS screen, tap Backup & Restore.

From the Back & Restore screen, tap Backup.

From the BSS Select Drive screen, tap to select the attached USB storage
drive for where to back up.

Tap to select the appropriate file to back up to the USB storage drive.

Tap Backup.

10.

On the back-up confirmation dialog box, tap OK.

TIP

The BSS screen can take up to 60 seconds to appear.

TIP

Use a USB storage drive that is at least 32 GB.

Summary of Contents for Allen-Bradley MobileView 2711T-VMBRACKET









































































































Search results

Summary of Contents for Allen-Bradley MobileView 2711T-VMBRACKET

Reviews:

Related manuals for Allen-Bradley MobileView 2711T-VMBRACKET

Brands by name

Popular brands

Rockwell Automation Allen-Bradley MobileView 2711T-VMBRACKET, User Manual

Search results

Summary of Contents for Allen-Bradley MobileView 2711T-VMBRACKET

Reviews:

Related manuals for Allen-Bradley MobileView 2711T-VMBRACKET

Brands by name

Popular brands