Rockwell Automation Allen-Bradley MobileView 2711T-VMBRACKET, User Manual

Page: 54 / 104

54 Rockwell Automation Publication 2711T-UM001E-EN-P - March 2019
Chapter 4 Install and Operate the Junction Boxes
Connect a Second Generation MobileView Terminal to an IP65
Junction Box
To power up or start a second generation MobileView 2711T terminal, insert a
22-pin connection cable into the MobileView IP65 junction box. A 22-pin
connection cable has a black cable connector.
Connect a Black Bridge Connector to an IP65 Junction Box
An optional black, 22-pin bridge connector (cat. no. 2711T-22JUMP) is
available for the IP65 junction box. It is for situations when the IP65 junction
box is powered on but a second generation MobileView terminal is not
connected to the junction box.
In these situations, the black bridge connector is connected so the IP65 junction
box is placed in a bridge active state and its E-stop circuits are bypassed.
The black bridge connector includes a tethered cable so it can be secured with
one of the bottom screws of an IP65 junction box. For more information on the
bottom screws, see
Mount the IP65 Junction Box to Its Back Plate on page 48 .
IMPORTANT You can use a 22-pin connection cable with all second generation MobileView
terminals, first generation MobileView terminals 2711T-F10G1N1 and
2711T-T10G1N1, and both IP65 junction boxes.
You cannot use a 22-pin connection cable with first generation MobileView
terminals 2711T-B10K1N1, 2711T-B10M1N1, and 2711T-T10R1N1, or an IP20
junction box.
57 mm (2.25 in)
Red dot on cable connector must align
with red dot on junction box.