Roche Nimblegen MS 200, Operator'S Manual

Page: 63 / 104

NimbleGen MS 200 Microarray Scanner Operator’s Manual v1.0 | 51
Figure 28: Area Definition Control for Specifying a Single Scan Area
5.
Capture the entire designated feature area. Move the mouse pointer
inside the white scan area rectangle and click to enable the move cursor.
6. Drag the rectangle over the desired feature region. Adjust the size of the
rectangle by dragging a corner/side handle.
7. Click Apply to confirm your settings.
8. If desired, click Save to save settings to an area file for future use.
To use an existing array image as a template for your area layout:
Choose between the following:
„
To load an image from a file, click the Roche button ( ), select Open
Image , and choose the image to open. The image appears in the Image
View.