Roche Nimblegen MS 200 Operator'S Manual Download Page 37

Page: 37 / 104

NimbleGen MS 200 Microarray Scanner Operator’s Manual v1.0

| 25

Insert the installation CD for the instrument software into the
computer’s CD drive.

Open Windows File Explorer.

Run autorun.exe on the installation CD.

Click

Next

to accept the suggested destination folder. To choose a

different destination folder, click

Browse

and click

Next

when done

selecting the folder.

The Welcome window opens. Click

Install Software

to continue.

The instrument software and all necessary components will be installed
by an automatic setup program. Wait while the setup process is
performed.

Figure 13: Welcome Window

After successful installation, carefully read the release notes, if provided,
to learn about the latest changes and functionality.

3.7 Starting the Control Unit, Microarray Scanner, and

Instrument Software

Start the control unit and log into your user account.

The following is a preconfigured account. Your system administrator
may set up additional accounts.

•

Account: msOperator

•

Password: 1-msOperator

Summary of Contents for Nimblegen MS 200








































































































Search results

Summary of Contents for Nimblegen MS 200

Reviews:

Roche Nimblegen MS 200, Operator'S Manual, Page: 37 / 104

Search results

Summary of Contents for Nimblegen MS 200

Reviews: