Robur Roburbox100, Installation And Use Manual

Page: 23 / 84

GENERAL AND TECHNICAL FEATURES section
Ed. 06/2014 – FW version 1.002 17
If no request arrives from RB100, it does not mean that DDC-controlled units
remain off; this depends on the set-up of a specific menu on the Control Panel [ref.
to DDC Installation Manual (D-LBR 273) and DDC Use and Programming Manual
(D-LBR 249)] which allows system to operate with the only requests coming from
RB100 or with the only DDC internal request or both.
Figure 5
Voltage signal input trend for hot analogue service
Figure 6
Voltage signal input trend for cold analogue service
Andamento ingresso segnale analogico
servizio caldo
30
35
40
45
50
55
60
65
70
75
80
85
0 2 4 6 8 10
Tensione in ingresso al servizio [Volt DC]
T
e
m
p
er
atu
ra [°C
]
Temperature
value with input
at 0V
Temperature
value with input
at 10V
OFF temperature
value. Under such
value, all requests are
interpreted as “ Off ”
Andamento ingresso segnale analogico
servizio freddo
7
8
9
10
11
12
13
14
15
0 2 4 6 8 10
Tensione in ingresso al servizio [Volt DC]
T
e
m
p
er
at
u
ra [
°C]
Temperature value
with input at 0V
OFF temperature
value. Under such
value, all requests are
interpreted as “Off ”
Temperature
value with input
at 10V
Analogue signal input trend
for hot service
Service input voltage [Volt DC]
Analogue signal input trend
for cold service
Service input voltage [Volt DC]