Robur Roburbox100, Installation And Use Manual

Page: 51 / 84

COMMISSIONING section
Ed. 06/2014 – FW version 1.002 45
SECTION 3 COMMISSIONING
This section provides the following information on appliance:
•
Instructions necessary to Robur Authorised Technical Assistance Centre (TAC) for the
whole commissioning procedure on appliance (see Paragraph 3.1);
The whole procedure for appliance commissioning provides for the performance of
the following (main) operating phases:
- preliminary checks on plant configuration;
- adjustment of plant operating parameters through RB100 and DDC.
Before operating as described in this section, the technician must read Paragraph
1.1 on Page 3.
The appliance must be connected to a DDC (version 4.000 or higher, configured as
controller); for control panel configuration phases, refer to two booklets about it.