Robur Roburbox100, Installation And Use Manual

Page: 3 / 84

Foreword
Ed. 06/2014 – FW version 1.002 I
FOREWORD
This "Installation and Use Manual" is a guide for installation and use of RB100 (Robur
Box) interface device, between one or more external control system and GA and GAHP
series Direct digital controller (DDC).
This manual is specifically intended for:
¾ installation technicians for the carrying out of a correct installation of Robur
appliances;
¾
installation technicians and Robur Authorised Technical Assistance Centres
(TACs) for the correct configuration.
The manual also includes:
- a section showing operations for a proper “commissioning”;
- a section showing operations for a “service configuration”.
The descriptions provided in this manual refer to RB100 interface device, version 1.000.
Summary
The manual is divided into 5 sections and one appendix:
SECTION 1 is intended for user, hydraulic and electric installer, as well as authorized
technical assistant. It provides general warnings, short descriptions on appliance
operation and its manufacturing features. This section also contains appliance technical
data and dimensional drawings.
SECTION 2 is intended for the electric installer. It provides information necessary to the
electrician to electrically connect the appliance.
SECTION 3 is intended for authorized service technician. It provides instructions
necessary for the whole commissioning procedure (preliminary conformity checks on
system, "First turning-on").
SECTION 4 is intended for Robur assistant and installer (TAC)
.
It provides information on
appliance menus.
SECTION 5 is intended for Robur assistant and installer (TAC)
.
It provides instructions
necessary for appliance configuration.
APPENDIX contains operating code tables and relevant instructions.
To quickly access to sections, refer to the relevant graphic icons (see Table 2,
Page III) located on the right margin of odd pages.