Robur Roburbox100, Installation And Use Manual

Page: 70 / 84

RB100 : Installation and Use Manual
64 Ed. 06/2014 – FW version 1.002
•
To navigate by knob:
Have
access to electric panel (see previous procedure).
1. Press knob once for access to menu selection.
2. Browse on display items by rotating knobs in 2 directions, clockwise to display the
following item and counter-clockwise for the previous one.
3.
Stop on the relevant value and press knob to have access to menu selected and its
parameters.
4. Rotate the knob again to display letter E (exit) and press to return to previous
sections.
5.2 Access to board menus
The following procedure shows how to have access board menus. Information
given is sufficient for access to display menus 0 and 1; for access to other menus,
further information is necessary contained in the paragraphs specified (paragraphs
5.3 to 5.7).
For access to menus and display parameter current value:
1. Press the knob; display shows the first menu: menu 0: .
2. Press knob again: access to menu 0 displayed; display shows the number of menu
(left) and the first parameter of menu (right): .
3. Browse the other parameters of current menu by rotating the knob. Display shows
all parameters of menu; letter E is the last displayed: ; press knob on E, to
exit current menu.
4.
For access to a parameter, locate on the relevant one and press the knob. For
example, for access to parameter 0 (rectified electric voltage), rotate knob to
display it, , then press for access.
Display shows the current value of parameter, such as: .
Press again knob to return to current parameter.
Repeat point 4 to view another parameter 4.
Exit menu by acting as described in point 3.
5. For access to other displayed menus, select menu desired in point 1 and press
knob.
6. For exit menu section, perform point 3, rotate knob until letter E appears,
then press it again. appears.