Robur Roburbox100, Installation And Use Manual

Page: 57 / 84

USER INTERFACE section
Ed. 06/2014 – FW version 1.002 51
4.2 MENU 0 – STATUS VIEW
This menu shows valve and request service statuses.
MENU 0 – STATUS VIEW
PARAMETER DESCRIPTION
SYSTEM: INPUT VOLTAGE
SYSTEM: COMMON ALARM OUTPUT RELAY ([0] INACTIVE; [1] ACTIVE)
COLD SERVICE REQUEST: TEMPERATURE (°C-°F) CORRESPONDING TO INPUT VOLTAGE,
IF INPUT IS CONFIGURED AS ANALOGUE; STATUS (ON, 1-OFF, 0) IF INPUT IS
CONFIGURED AS DIGITAL
COLD SERVICE: INPUT VOLTAGE (V)
COLD SERVICE: SERVICE NON-AVAILABILITY RELAY OUTPUT (0 SERVICE AVAILABLE, 1
SERVICE NON AVAILABLE)
HOT SERVICE REQUEST: TEMPERATURE (°C-°F) CORRESPONDING TO INPUT VOLTAGE,
IF INPUT IS CONFIGURED AS ANALOGUE; STATUS (ON, 1-OFF, 0) IF INPUT IS
CONFIGURED AS DIGITAL
HOT SERVICE: INPUT VOLTAGE (V)
HOT SERVICE: SERVICE NON-AVAILABILITY RELAY OUTPUT (0 SERVICE AVAILABLE, 1
SERVICE NON AVAILABLE)
DHW0 SERVICE REQUEST: TEMPERATURE (°C-°F) CORRESPONDING TO INPUT VOLTAGE,
IF INPUT IS CONFIGURED AS ANALOGUE; STATUS (ON, 1-OFF, 0) IF INPUT IS
CONFIGURED AS DIGITAL
DHW0 SERVICE: INPUT VOLTAGE (V)
DHW0 SERVICE: SERVICE NON-AVAILABILITY RELAY OUTPUT (0 SERVICE AVAILABLE, 1
SERVICE NON AVAILABLE)
DHW1 SERVICE REQUEST: TEMPERATURE (°C-°F) CORRESPONDING TO INPUT VOLTAGE,
IF INPUT IS CONFIGURED AS ANALOGUE; STATUS (ON, 1-OFF, 0) IF INPUT IS
CONFIGURED AS DIGITAL
DHW1 SERVICE: INPUT VOLTAGE (V)
DHW1 SERVICE: SERVICE NON-AVAILABILITY RELAY OUTPUT (0 SERVICE AVAILABLE, 1
SERVICE NON AVAILABLE)
Table 10
Parameters of menu 0
to be continued
ÆÆÆ