Riso RZ1070, User Manual

Page: 90 / 286

Functions for Master-Making
Adjusting the Master-Making position [Binding Margin] 90
Adjusting the Master-Making position
[Binding Margin]
You can make a master by putting the binding margin on either the top, bottom, left and right of the original. The
adjustable range is from 0 to 50 mm (0.0" to 1
15
/
16
") on the top, bottom, left and right.
Important!:
• “Binding margin” is a function for adjusting the master-making position and not a function for adding a binding mar-
gin.
• When the original has no margin, the image may extend out of the area for master-making. The part that is outside
the master-making area is not used for master-making.
• The position of the binding margin is the side that appears first when printed copies are discharged to the Paper
Receiving Tray.
• The binding margin can be set to either the Top, Bottom, Right, and Left of printed copies.
• When auto reproduction is set, move the image to where it should appear after the magnification has been
adjusted.
• This function is available with “90
°
Rotation” or “Rotate”.
Note:
• When the Print Position Adjustment on the control panel is used in combination with the “Binding margin”, the Out-
put Print Position can be moved by up to approx. 65 mm (2
9
/
16
") against the position of the original image.
• This function can be used to set the binding margins even when the original is set on the Glass Platen.
• This function cannot be used with the following functions.
– Multi-Up Print
– 2 Up
– Overlay
– Scanning Side -ADF
– Layout
1
Touch [Binding Margin] on the Func-
tions Screen.
2
Touch [Top], [Bottom], [Left] or
[Right] to adjust.
Basic Selections Functions Admin.
Ready to Make Master
P.
Reservation
ADF Semi-Auto
Preview
Max. Scan
Storage Memory
Overlay
Top Margin
Binding Margin
2/4