Riso RZ1070, User Manual

Page: 27 / 286

Getting Acquainted
Control Panel 27
13)
Start Key
Starts master-making or printing process or executes
specified operations.
The key is lighted only when the key is active.
14)
Proof Key ( ) p.104)
Use when you want to check print result after adjusting
the print position, for example.
This allows you to print proof copies without affecting the
value on the Print Quantity Display.
15)
Stop Key
Stops current operation in progress. During the master-
making procedure, the machine will not stop until the
master-making process is completed.
16)
Reset Key
Returns all settings to the initial settings, and clears the
error screen on the display after a system error has been
resolved.
17)
Wake-Up Key
Wakes up the printer in Energy Saving mode.
Use this key also to log out from the machine.
18)
Auto-Process Key ( ) p.68)
Performs non-stop operation from master-making
through printing. When activated, the indicator besides
the key lights.
19)
Print Key
Makes the printer be ready for printing.
20)
Master-Making Key
Makes the printer be ready for making masters.
21)
Progress Arrows
Indicates master-making and printing progress status.
Ready to make a master (Auto ON): when 1 is blinking
Ready to make a master: when 1,2 are blinking
Ready to print: when 3,4 are blinking
The indicator increases one bar at a time from the left,
indicating the progress of the current master-making or
printing job.
• Indicator 1 or 3 blinks during the master-making/print-
ing operation.
• If a master-making or printing job is halted, the
progress bar stays lit at that position. (Ready for
resume)
20 21 19 18 17
13 14 15 16
1)
Master-Making
Indicator
2)
Master-Making
Stop Bar
3)
Print Indicator
4)
Printing Stop Bar