Riso RZ1070, User Manual

Page: 182 / 286

Advanced Features
Registering a Custom Paper Size [Custom Paper Entry] 182
Tip:
Printing on Extended Paper
The machine can print on paper 436 mm-555 mm
(17
3
/
16
"-21
14
/
16
") long (top to bottom facing the
paper feeding direction) by storing the size as a
custom-size.
) p.180
When entering a size longer than 436 mm (17
3
/
16
")
(top to bottom facing the paper feed direction) on
the Custom Paper Entry screen, the paper will be
treated as “Extended Paper”.
When “Extended Paper” is selected on the Feed
Tray (Paper) screen, the machine switches into
“Extended Paper” mode.
Important!:
• Some Extended Paper may fail to pass through
the machine due to its paper characteristics, or
may get smudged with ink due to its image posi-
tioning. Consult your dealer (or authorized ser-
vice representative) for advice.
“Extended Paper” Mode
• When the machine is on “Extended Paper”
mode, it is indicated in the message area as
either “Ready to Make Master <Ext.Paper>” or
“Ready to Print <Ext.Paper>”.
• On “Extended Paper” mode, the machine can
print papers measuring 436 mm-555 mm
(17
3
/
16
"-21
14
/
16
") lengthwise from top to bottom
facing the paper feed direction. However, max-
imum printing area and top/bottom Print Posi-
tioning range remains as usual.
) p.20
) p.102
• Print timing and speed is different on “Extended
Paper” mode in comparison to normal printing.
This is to be expected, so do not be alarmed.
• Contact your dealer (or authorized service rep-
resentative) for suggestions about placing
paper on the Paper Receiving Trays when on
“Extended Paper” mode.