Riso RZ1070, User Manual

Page: 168 / 286

Advanced Features
Changing Default Settings [Admin.] 168
Changing Default Settings
[Admin.]
The default settings can be modified to best suit your needs.
They may be edited as needed.
Important!:
• If the administrator is registered in User Management, only the administrator can change the [Admin.] settings.
(This operation requires input of the administrator's PIN code or connection of the registered USB Flash Drive.)
) p.122
• Depending upon the usage environment, the “Admin.” features may not be available (the “Admin.” tab may not be
displayed).
Consult your dealer (or authorized service representative) for details.
Note:
• The default settings are the values restored when the machine is turned ON or when the key is pressed.
Configurable Functions
:Initial setting (factory default)
* This function can be set only when the option is installed.
Display Access
Button
Functions Description
[Display]
DirectAccess Entry
Store frequently-used functions on the Basic Screen
for each mode.
)
p.178
Selections Entry
Store frequently-used functions on the Selections
screen for each mode. ) p.178
Display Priority
Select first screen to display following the Startup.
Note:
• The Mode Screen is available only when “Mode Key
Pattern” is set to “Mode Selection”.
Mode Screen/RISO Print/
Scanning/Link Mode
Mode Key Pattern
Select screens to display when the
key is
pressed.
[Mode Selection]
Pressing the key will open the Mode Screen no
matter which screen you are currently on.
[Loop]
The screen changes as shown below when the
key is pressed.
• Normally: “Master Making Basic Screen” ←→ ”Print
Basic Screen”
• When a Linked Printer is connected: “Link Basic
Screen”
←→
“Master Making/Print Basic Screen”
• When the optional Document Storage Card is
installed: “Scan Basic Screen”
←→
“Master Making/
Print Basic Screen”
Mode Selection /Loop