Rion UV-15, Instruction Manual, Page: 56 / 72

46
Operation Modes
Using the Interface Unit UV-22 (option)
When the UV-22 is connected, the sound and vibration measurement system
can be controlled by sending commands from a computer, and measurement
values can be transferred to the computer.
Both USB and Ethernet connections are supported. A Software UV-22Viewer
is also supplied to the UV-22.
Main functions with UV-22 connected
• Setup control from computer
System setup can be performed from a computer, via a USB or Eth-
ernet connection.
USB: USB 1.1 One-on-one connection between computer and
UV-22
Ethernet: 10/100 Base-TX
One-on-one connection between computer
and UV-22
• Data transfer to computer
Measurement data can be sent to a computer, via a USB or Ethernet
connection.
Measurement data:
100 ms instantaneous value, maximum value,
± peak
I
O
UV-22
POWER
RED:ERROR
USB
LOCAL
MASTER/SLAVE
USB
ETHERNET
POWER RESET
PICKUP
VIBRATION METER UNIT
UV-15
CAL
DISPLAY
INPUT MEAS
RANGE
RMS EQ PEAK EQ P-P
SETUP
PICKUP
VIBRATION METER UNIT
UV-15
CAL
DISPLAY
INPUT
MEAS
RANGE
RMS
EQ PEAK EQ P-P
SETUP
PICKUP
VIBRATION METER UNIT
UV-15
CAL
DISPLAY
INPUT
MEAS
RANGE
RMS
EQ PEAK EQ P-P
SETUP
Computer
Vibration Meter Unit UV-15 (max. 16 units)
Interface Unit UV-22
To Ethernet or USB port