Rion UV-15, Instruction Manual, Page: 41 / 72

31
Operation Modes
The UV-15 has the following operation modes.
Operation mode Function outline
Input setup mode Make settings for input (connector, sensitivity)
and ID number
TEDS communication
mode Receive sensitivity data and other information from
TEDS compliant accelerometer with integrated
preamplifi er
Measurement setup
mode Make settings for acceleration, velocity, displace-
ment, display characteristics, HPF, and LPF
Calibration mode Supply CAL signal for calibration of external
equipment
UV-22 communication
mode Control UV-15 from connected Interface Unit
UV-22
Measurement mode Make measurements
Check mode Check the software version of the UV-15
Input setup mode
This serves to make settings for the connected accelerometer and select an
ID number for the UV-15. Be sure to make or check these settings before
starting a measurement.
Input setup mode functions
Item Settings
Input selection FRONT CHARGE
FRONT CCLD
FRONT CCLD TEDS
REAR
Sensitivity 0.100 to 0.999 in 0.001 steps
1.00 to 9.99 in 0.01 steps
10.0 to 99.9 in 0.1 steps
ID number 1 to 16