Rion UV-15, Instruction Manual, Page: 40 / 72

30
Output Connections
The rear panel of the UV-15 provides one AC output connector and one DC
output connector. These can be used to supply a signal for example to an
oscilloscope for waveform observation, to a data recorder for recording, or
to an FFT analyzer for analysis. The calibration signal (see page 38) is also
output from these connectors.
Output type AC OUT DC OUT
Connector type BNC BNC
Output impedance Approx. 50 Ω Approx. 50 Ω
Max. output voltage Approx. ±10 V (peak)
(no-load condition) Approx. +10 V (peak)
(no-load condition)
Load impedance 10 kΩ or higher 10 kΩ or higher
DC IN
9-15V
+
15
No. 12345678
RION CO.,LTD.
MADE IN JAPAN
AC OUT
DC OUT
INPUT
(PREAMP)
BNC-BNC cable
NC-39A (option)
Rear panel
r-FWFMSFDPSEFS
r''5BOBMZ[FS
r4PVOEBOEWJCSBUJPOMFWFM
processor
r%BUBSFDPS
EFS