Rion UV-15, Instruction Manual, Page: 55 / 72

45
Operation Modes
Check mode
You can check the software version of the UV-15 as follows.
1. Press the CAL key while the unit is in measurement mode.
2. Hold down the RANGE key for at least 2 seconds, until the ver-
sion number is shown on the LCD panel.
3. Press the MEAS key to return to the measurement mode.
UV-15
CAL
DISPLAY
INPUT MEAS
RANGE
SETUP
PICKUP
VIBRATION METER UNIT
RMS EQ PEAK EQ P-P
OUTPUT CAL
indicator
CAL key
Hold down RANGE key
for at least 2 seconds
REMOTE
FRONT
REAR
ACOUST CAL
mm/s mm
F
S
10ms
CHARGE
CCLD TEDS
No.
RANGE SENS
dB
UN
FS
50%
10%
HPF
LPF
Hz
kHz
Version
(example)
LCD panel