Rion UV-15, Instruction Manual, Page: 47 / 72

37
Operation Modes
4. When you press the MEAS key, the LPF (low-pass fi lter) setup screen
appears.
You can change the setting with the RANGE keys.
OFF, 300 Hz, 500 Hz, 1 kHz, 1.5 kHz, 2 kHz, 3 kHz, 5 kHz,
10 kHz, 15 kHz, 20 kHz
The OFF setting is shown as "---".
When the setting is as required, press the MEAS key.
5. When you press the MEAS key, the changed settings become active
and the setup procedure is completed.
If you press the INPUT key at any point during steps 1 to 4, the
settings will become active and the unit switches to measurement
mode immediately.
Note
Range and display characteristics settings are memo-
rized separately for acceleration (ACC), velocity
(VEL), and displacement (DISP).
For example, when you change from acceleration
(ACC) to velocity (VEL) measurement, the range and
display characteristics settings previously selected
for velocity (VEL) will be active.
When a user fi lter setting has been input, the HPF
and LPF setup screens will show the user fi lter fre-
quency as an additional item.
PICKUP
VIBRATION METER UNIT
UV-15
CAL
DISPLAY
INPUT MEAS
RANGE
RMS EQ PEAK EQ P-P
SETUP
FRONT
REAR
ACOUST CAL
m/s
2
F
S
10ms
CHARGE
CCLD TEDS
No.
RANGE SENS
FS
50%
10%
HPF
LPF
Hz
kHz
VIBRATION METER UNIT
UV-15
RMS
EQ PEAK EQ P-P
INPUT key
MEAS key
RANGE
keys
LCD panel
Operation panel
Operation panel
Select frequency characteristics
with MEAS key
Change setting with RANGE keys
Press MEAS key to accept
Select measurement mode with
MEAS key
Select unit with RANGE keys
Selected m/s
2 flashes
Press MEAS key to accept
Select display characteristics with
MEAS key
Select setting with RANGE keys
Flashing arrow symbol (
)
indicates selected setting
Press MEAS key to accept