Rion UV-15, Instruction Manual, Page: 42 / 72

32
Operation Modes
Setup procedure
1. Pressing the INPUT key in measurement mode activates the input
setup mode. The current input setting fl ashes on the display. In this
condition, you can change the setting. Select the appropriate setting
for the connected accelerometer and the input that is used.
• FRONT CHARGE:
Piezoelectric accelerometer connected to Microdot con-
nector on front panel
• FRONT CCLD:
Accelerometer with integrated preamplifi er connected to
Microdot connector on front panel
• FRONT CCLD TEDS:
TEDS compliant accelerometer with integrated preampli-
fi er connected to Microdot connector on front panel
• REAR:
Preamplifi er VP-26A connected to 7-pin connector on
rear panel
Use the RANGE keys to change and select the setting. The indicator for
the selected setting fl ashes.
When the setting is as required, press the INPUT key.
If FRONT CCLD TEDS was selected, the unit switches to TEDS com-
munication mode when you press the INPUT key. (See page 34.)
FRONT
REAR
ACOUST CAL
m/s
2
mm/s mm
F
S
10ms
CHARGE
CCLD TEDS
No.
RANGE SENS
dB
FS
50%
10%
HPF
LPF
Hz
kHz
PICKUP
VIBRATION METER UNIT
UV-15
CAL
DISPLAY
INPUT
MEAS
RMS EQ PEAK EQ P-P
SETUP
Operation panel
ID number indication
Input indicators
INPUT key
Press when required
selection is made
Sensitivity indication
DISPLAY key
Changes decimal
point for sensitivity
setting
LCD panel
MEAS key
RANGE keys
Change and select
settings with these
keys