26
33 GGEENNEERRAALL
U
UNNIITT IINNDDEENNTTIIFFIICCAATTIIO
ONN
SSeerriiaall nnuum
mbbeerr llaabbeell
The serial number label is positioned on the unit and allows to
indentify all the unit features.
W
Waarrnniinngg
It has not to be removed for any reason.
It reports the regulations indications such as:
•
machine type, exmple
•
size
•
serial number
xxxxxxxxxxxx
•
year of manufacture
•
wiring diagram number
•
electrical data
•
manufacturer logo and address .
SSeerriiaall nnuum
mbbeerr
It identifies uniquely each machine.
It identifies specific spare parts for the machine.
AAssssiissttaannccee rreeqquueesstt
Note data from the serial number label and write them in the
chart on side, so you will find them easily when needed.
In case of intervention you have to provide data.
Serie
Size
Serial number
Year of manufacture
Wiring diagram
PPrreelliim
miinnaarryy iinnffoorrm
maattiioonn
NNO
OTTEE
Before beginning the work, ensure you that have the final project
for installing the system and positioning the units.
Operate in compliance with safety regulations in force .
Use single protection devices.
44 RREECCEEPPTTIIO
ONN
?
11
22
A
33
44
55
66
A
B
Before accepting the delivery you have to check:
•
that the unit hasn
’
t been damaged during transport.
•
Check that the materials delivered correspond with that
indicated on the transport document comparing the data with
the identification label
‘
AA
’
positioned on the packaging.
In case of damage or anomaly:
•
Write down on the transport document the damage you found
and quote this sentence: "Conditional acceptance clear
evidence of deficiencies/damages during transport".
•
Contact supplier and the carrier by fax and registered mail
with advice of receipt.
NNO
OTTEE
Any disputes must be made within the 8 days following the
delivery. Complaints after this period are invalid.
SSttoorraaggee
Shelter from: direct sunlight, rain, sand and wind.
Stocking temperature:
maximum 50°C
minimum -10°C
NNO
OTTEE
The respect of the instructions on the exterior side of the
packaging assures the physical and functional integrity of the
unit for the final user
’
s advantage.
HHaannddlliinngg
Before handling verify that the unit keeps its balance.
The following examples are indications the choice of the means
and of the handling modes will depend on factors.
1 Verify unit weight and handling equipment lifting capacity .
2 Identify critical points during handling (disconnected routes,
flights, steps, doors).
3 Stair climbing trolley.
4 Use protection (A) to avoid the unit damaging
5 Belt input side for lifting (B) by crane
6 Fork input side the
DDAANNGGEERR
It is strictly forbidden to stand under the machine when it is
lifted.
geneRaL
4. GENERAL
