Path: Settings>General>I/O
Modules
Name
ID
Status
Assign ID
Reset overload protection
Remove module
Path: Settings>General>I/O>Modules
Name
The name of the module.
ID
The unique ID of the module.
Status
The status of the module.
OK: No errors detected.
Missing: No communication with module.
Unreliable: Unable to write configuration parameters.
Type: Module type incorrect.
Overload: Power drawn by outputs too high.
Absent: Not present in configuration.
Assign ID
Enables you to assign a module ID.
Afterwards, switch the system off and back on.
Only one module may be assigned an ID at the same time. For a detailed
explanation on how to assign an ID to a module, see the Aqua CX300
Installation Manual.
Reset overload protection
Once the cause of the overload has been removed, reset the overload protection
function. After the reset is complete, the outputs will be reactivated.
Remove module
Enables you to indicate that the module will be permanently removed from the
system. You can then safely remove the module and restart the system by switching
it off and back on.
Firmware
The version number of the firmware of the relevant I/O module.
Aqua CX300
47
Summary of Contents for Aqua CX300
Page 1: ...SV 02 03 2020 96010102 User Manual Aqua CX300...
Page 92: ......
