Contact start 1, type
Contact start 10, type
Select the type of contact start to be executed after entering the valve number:
Off: Execute a contact start when the contact opens.
On: Execute a contact start when the contact closes.
Over: Execute a contact start when the measured value rises above a preset
level.
Under: Execute a contact start when the measured value drops below a preset
level.
Additional options for the above-mentioned selections:
& Acc: Contact start. A contact start will also be executed if the valve assigned
to the contact is deactivated.
Contact start 1 smooth rate
Contact start 10 smooth rate
The speed with which the measured value of the contact start measurement will be
raised or lowered.
00:00:00: No smoothing will be applied.
00:10:00: Field value.
If the contact start measurement is a weight, for example, the measurement may
fluctuate when someone walks past the scales. To resolve such issues, this setting
enables the measurement value to be smoothed out.
EXAMPLE
Smooth rate 00:10:00 = 600 sec.
Actual measurement = 66.0 kg.
Previous weight measured = 60 kg.
Controller cycle time = 10 sec.
New contact start value measured = 60.0 + ((66.0 - 60.0) x 10 sec) / 600 sec =
60.1 kg.
3.3.3
Setting up valves
Active
Valve group number
Number of first valve group
Number of second valve group
Sequence in valve group
Sequence in first valve group
Sequence in second valve group
Irrigation percentage
Flow rate
Aqua CX300
60
Summary of Contents for Aqua CX300
Page 1: ...SV 02 03 2020 96010102 User Manual Aqua CX300...
Page 92: ......
