Ridder Aqua CX300, User Manual

Page: 36 / 92

3.3.1.8 Cyclic start
Cyclic start active
Period 1: start time
Period 1: cycle time
Period 1: end time
Period 2: start time
Period 2: cycle time
Period 2: end time
Path: Settings>Programs>Program name>Cyclic start
Cyclic start active
No: Not active.
Yes: Active.
Period 1: start time
The time (in hours, minutes and seconds) at which the relevant period for the cyclic
start will start.
Real time: fixed point in time.
Sunrise: time before (-) or after sunrise.
Sunset: time before (-) or after sunset.
Period 1: cycle time
The duration of a cycle.
A start will be executed once the cycle time has elapsed. The cycle time will then
reset, and the countdown will start again.
The countdown of the cycle time will also reset and restart whenever another
type of start (e.g. time start, manual start, contact start or radiation start) is
executed.
Period 1: end time
The time at which the relevant period for the cyclic start will end.
Real time: a fixed point in time.
Sunrise: time before (-) or after sunrise.
Sunset: time before (-) or after sunset.
The period is disabled if 00:00:00 (real time) is set for the end time.
Period 2
See period 1.
Aqua CX300
36