Ridder Aqua CX300, User Manual, Page: 17 / 92

Assign valves to group
In the 'Assign valves to group' menu, you can assign or unassign valves using the
'Enter' key. To activate or deactivate valves, use the 'De(activate) valve' key.
The group to which a particular valve has been assigned is displayed next to the
selection screen on the right-hand side.
Use the arrow keys to move the cursor, and press the 'OK' key to confirm your
changes.
Assigning valves to two valve groups (Aqua CX300 v.6.0 or higher)
As from version 6.0, it is possible to assign valves to two valve groups. You can also
set the sequence in which valves open.
If a valve sequence is set and irrigation is applied with multiple valves
simultaneously, valves may only open simultaneously if they have the same sequence
number.
To enable the function for assigning valves to two valve groups, set ‘Assign valves to
2nd group’ to Yes.
Figure 3-1 Assigning valve to second group
To activate the function for setting the valve sequence, set ‘Set valve sequence’ to
Yes.
Figure 3-2 Setting valve sequence
You can assign valves using the Valve settings menu or the assign valves screen.
Aqua CX300
17