S-SERIES PRIVATE USE SERVICE MANUAL
MAINTENANCE
SEPTEMBER 2020
3- 13
32DSW02.F
FIGURE 3-24
4. Refer to
Figure 3-25
. Lift left hand armrest to remove rubber washer.
FIGURE 3-25
5. Refer to
Figures 3-26
and
3-27
. Detach snap ring from pin then remove washer and split washer.
Retain for installation.
FIGURE 3-26
FIGURE 3-27
NOTE:
Refer to
Figures 3-26 and 3-27
. When removing knuckle arm assembly from platform pin, detach 2 thin
plastic washers and one thick plastic washer. Retain for installation.
6. Refer to
Figure 3-28
. Remove screw and lock washer then remove pin to detach knuckle arm assembly
from platform assembly.
