S-SERIES PRIVATE USE SERVICE MANUAL
MAINTENANCE
SEPTEMBER 2020
3- 9
32DSW02.F
CAUTION!
Lift weight is approximately 360-390 lbs. Use extreme care when positioning lift.
This procedure may require one additional person.
12. Refer to
Figures 3-15.
Remove the retaining screws for each roller replacement.
FIGURE 3-15
13. Refer to
Figures 3-16.
Remove the retaining screws for each roller replacement.
FIGURE 3-16
14. Re-assembly in reverse order.
Note:
When re-assembling, do not apply thread lock on the roller retaining screws. Applying thread lock on
screws will prevent the roller from rotating.
Note:
Refer to
Figures 3-9 and 3-10
. When re-assembling, note that cable should wrap around grooved
bearings and align with white delrin cable guide. Partially stow lift to remove wood block. Hold cable with
pliers when deploying lift to regain tension.
15. Test Deploy and Stow operation of bridgeplate. If required to get bridgeplate to lie flat, apply silicone spray to
front rollers and delrin glide block.
F. GAS SPRING REPLACEMENT
1. Refer to
Figure 3-17
. Secure gas spring with pliers for leverage.
2. Refer to
Figure 3-18
. Remove nut that attaches gas spring to baseplate and retain for installation.
REMOVE
REMOVE
