S-SERIES PRIVATE USE SERVICE MANUAL
MAINTENANCE
SEPTEMBER 2020
3- 15
32DSW02.F
FIGURE 3-32
FIGURE 3-33
13. Refer to
Figure 3-34
. Remove two screws and two nuts to detach stow-lock assembly from tower
assembly and retain hardware.
RSM0005900
TOWER ASSEMBLY
MANUAL RELEASE HANDLE
STOW-LOCK ASSEMBLY
NUTS (2)
SCREWS (2)
FIGURE 3-34
14. Remove stow-lock assembly and replace with stow-lock assembly (P/N 42054). Re-assemble in reverse
order.
I.
T-NUT ROLLER REPLACEMENT
NOTE:
T-Nut replacement procedure should be completed after Stow-Lock replacement. Platform will be
deployed to ground level and knuckle arm assembly will be detached.
1. Refer to
Figures 3-35 and 3-36.
Remove snap ring then remove knuckle actuator pivot pin.
FIGURE 3-35
FIGURE 3-36
