Ricoh Ri 1000 User Manual Download Page 118

Page: 118 / 141

RICOH Ri 1000

User Manual

118

Monthly

(frequency depends on use - clean weekly if printing 30 hrs + per week)

How to Clean the Guide Rod and the Encoder Sheet

Cleaning part: The Guide Rod and the Encoder Sheet

Timing of Cleaning: Cleaning once a week

Cleaning content

：

Clean the Guide Rod and the Encoder Sheet to maintain head ejection quality and

allow normal operation of the carriage.

Apply grease to the Guide Rod,

and clean the Encoder Sheet with Cleaning Liquid.

Cleaning work should be carried out until completion, without interruption.

Also, sure to use Cleaning Applicator and Cleaning Liquid dedicated to Ri 1000.

Otherwise, it may cause a failure

Cleaning time: Half an hour

Things to prepare: Gloves (commercial product, one that does not pass ink) / To wear

Protective glasses or goggles (commercially available) / To wear

Cleaning Applicator dedicated to Ri 1000

Grease dedicated to Ri 1000

Lint Free Wipe

dedicated to Ri 1000

Cleaning Liquid dedicated to Ri 1000

Summary of Contents for Ri 1000














































































































































Search results

Summary of Contents for Ri 1000

Reviews:

Related manuals for Ri 1000

Brands by name

Popular brands

Ricoh Ri 1000, User Manual

Search results

Summary of Contents for Ri 1000

Reviews:

Related manuals for Ri 1000

Brands by name

Popular brands