Ricoh Ri 1000 User Manual Download Page 138

Page: 138 / 141

RICOH Ri 1000

User Manual

138

10 About Open Source Software License

ZLib

This software is provided 'as-is', without any express or implied

warranty. In no event will the authors be held liable for any damages

arising from the use of this software.

Permission is granted to anyone to use this software for any purpose,

including commercial applications, and to alter it and redistribute it

freely, subject to the following restrictions:

1. The origin of this software must not be misrepresented; you must not

claim that you wrote the original software. If you use this software

in a product, an acknowledgment in the product documentation would be

appreciated but is not required.

2. Altered source versions must be plainly marked as such, and must not be

misrepresented as being the original software.

3. This notice may not be removed or altered from any source distribution.

Jean-loup Gailly Mark Adler

[email protected] [email protected]

Summary of Contents for Ri 1000














































































































































Search results

Summary of Contents for Ri 1000

Reviews:

Related manuals for Ri 1000

Brands by name

Popular brands

Ricoh Ri 1000, User Manual

Search results

Summary of Contents for Ri 1000

Reviews:

Related manuals for Ri 1000

Brands by name

Popular brands