Ricoh Priport JP1030 Operating Instructions Manual Download Page 160

Page: 160 / 419

viii

Machine Interior

Document feeder (Option)

Original inserted into the document feed-
er are individually and automatically fed
onto and removed from the exposure
glass. See

⇒

P.43

“Printing Using the Op-

tional 30 Originals Document Feeder”

Paper delivery side plates

Use to align the prints on the paper deliv-
ery tray.

Paper delivery end plate

Use to align the leading edge of prints.

Paper delivery tray

Completed prints are delivered here.

Main switch

Use to turn the power on or off.

Drum unit

The master is wrapped around this unit.

Drum unit lock lever

Lift to unlock and pull out the drum unit.

Ink holder

Set the ink cartridge in this holder.

SilverV-EN.book Page viii Monday, May 15, 2000 3:23 PM

Summary of Contents for Priport JP1030




































































































































































































































































































































































































































Search results

Summary of Contents for Priport JP1030

Reviews:

Related manuals for Priport JP1030

Brands by name

Popular brands

Ricoh Priport JP1030, Operating Instructions Manual

Search results

Summary of Contents for Priport JP1030

Reviews:

Related manuals for Priport JP1030

Brands by name

Popular brands