Ricoh Priport JP1030, Operating Instructions Manual

Page: 55 / 419

OPERATION
30
1
D
With the
{{{{
Number
}}}}
keys, enter the
number of prints for the second
original.
E
Press the
{{{{
#
}}}}
key.
This stores the number of prints to
be made for the second original in
memory 2.
Note
❒
Repeat steps
D
and
E
for each
original.
❒
The number of prints for up to
20 originals can be stored.
F
Press the
{{{{
#
}}}}
key again.
The memory returns to memory 1.
Note
❒
If you store the number of prints
for 20 originals, the memory
number returns to 1. It is not
necessary to press the
{
#
}
key.
G
Set the first original face down on
the exposure glass.
Note
❒
Set originals one sheet at a time
in the same order that you
stored them in memory.
H
Press the
{{{{
Start
}}}}
key.
I
Check the image position of the
trial or proof print.
Note
❒
If the image position is not cor-
rect, adjust it using the
{
Image
Position
}
keys (see
⇒
P.8 “Shift-
ing The Print Image Position For-
ward Or Backward”
) or the side
table fine adjusting dial (see
⇒
P.8 “Shifting The Print Image Po-
sition To The Right Or Left” ).
TSLS011N
TSLS01TN
TSLH010E
TSLS012N